This product is a square hijab scarf measuring 115 cm by 115 cm, constructed from 100% cotton voile fabric. Cotton voile is a lightweight, semi-sheer plain weave textile known for its soft drape, breathability, and smooth hand feel. The fabric is typically woven with combed cotton yarns in the range of 60s to 80s Ne, resulting in a thread count between 120 and 160 ends per inch (EPI) in both warp and weft directions. This construction provides sufficient opacity for modest coverage while maintaining air permeability suitable for warm climates or indoor environments. The square format allows for versatile styling options, including traditional wrapping, layered draping, or structured folds, accommodating diverse cultural and personal preferences.

The primary material is 100% combed cotton, processed to remove short fibers and impurities, enhancing yarn uniformity and tensile strength. Combed cotton voile typically exhibits a breaking strength of 18–22 N/tex in the warp direction and 16–20 N/tex in the weft, balancing durability with flexibility. The fabric’s air permeability ranges from 150 to 250 mm/s under standard test conditions (ISO 9237), allowing moisture vapor transmission while providing visual coverage. Its light scattering properties result in a diffuse transmission value of 40–60%, meaning it softens direct light without becoming transparent. Dimensional stability after washing is maintained within ±3% shrinkage when processed at 30°C with mild detergent, assuming proper pre-sanforization during manufacturing.

Customization is available across multiple parameters to meet specific branding, functional, or regional requirements. Fabric weight can be adjusted between 60 and 90 GSM by altering yarn count or weave density, affecting drape and opacity. Edge finishing options include rolled hem (2–3 mm), flat double-fold hem (5–7 mm), or picot trim, each influencing fray resistance and aesthetic profile. Color matching is achievable via Pantone, RAL, or custom dip-dye lots, with laboratory dip approval required before bulk production. Additional features such as printed motifs, embroidered logos, or jacquard-woven borders can be incorporated based on minimum order quantities and setup feasibility. All customizations are subject to technical review to ensure compatibility with the cotton voile base structure and end-use performance.

Quality assurance follows a multi-stage protocol aligned with textile industry standards. Incoming yarn is tested for count variation, tensile strength, and moisture content (ISO 2060, ISO 2062). Greige fabric undergoes inspection for ends/picks per inch, warp/weft bow and skew (max 3%), and visible defects using 4-point system under 300 lux illumination. Dyed lots are evaluated for colorfastness to washing (ISO 105 C06), rubbing (ISO 105 X12), and light (ISO 105 B02), with minimum ratings of 3–4 for stain and 4 for change. Final inspection includes dimensional verification (±5 mm tolerance), hand feel assessment, and visual screening for stains, holes, or print misregistration. Acceptable quality level (AQL) is set at 2.5 for major defects and 4.0 for minor defects per ISO 2859-1.

Standard packaging involves folding each scarf to a uniform size (typically 20×20 cm) and placing it in a polyethylene bag (50–60 micron thickness) to prevent moisture and particulate contamination during transit. Bags are then packed into export cartons measuring 40×30×25 cm, holding 50–60 units depending on fabric thickness. Carton weight ranges from 8 to 12 kg gross. Each carton is labeled with SKU, quantity, size, color code, and country of origin. For moisture-sensitive shipments, desiccant packets (silica gel, 5g per carton) can be included. Palletization follows ISO 6780 standards, with cartons stacked no higher than 1.6 m and secured via stretch wrap or strapping. Lead time for sample approval is 7–10 days; bulk production typically requires 14–21 days after confirmation, subject to fabric availability and customization complexity.

For technical inquiries, sample requests, or custom specification discussions, please contact our product engineering team. Provide details on intended use, required certifications, target quantity, and any special finishing or packaging needs. We will respond with a feasibility assessment, lead time estimate, and itemized quotation within two business days.

Contact Us