China Red Chiffon Scarf for Ladies

This product page details the specifications, construction, and typical applications of red chiffon scarves manufactured for ladies' apparel in China. The information focuses on material properties, dimensional tolerances, and production considerations relevant to B2B buyers in fashion textiles.

Material Composition and Properties

The scarf is constructed from 100% polyester chiffon, a plain-weave fabric characterized by its sheer appearance, lightweight feel, and slight crêpe texture. Typical yarn count ranges from 75D to 150D per filament, with a fabric weight between 15 to 30 grams per square meter (gsm). The red color is achieved through disperse dyeing, which provides good colorfastness to washing and light exposure under standard conditions (typically ISO 105-B02 rating of 4 or higher).

Polyester chiffon offers dimensional stability under normal handling, with typical shrinkage below 2% after washing at 30°C. The fabric exhibits a balanced tensile strength, generally between 15 to 25 N/mm² in warp and weft directions, sufficient for scarf applications where minimal mechanical stress is expected. Breathability is moderate due to the tight filament structure, though the open weave allows some air permeability.

Dimensional Specifications

Standard finished dimensions for ladies' chiffon scarves produced in China typically range from 160 cm to 180 cm in length and 60 cm to 90 cm in width. These measurements are taken after cutting and before any edge finishing. Tolerance on length and width is usually ±2 cm, depending on cutting equipment and fabric relaxation. Custom dimensions are available upon request, subject to minimum order quantities and pattern efficiency considerations.

Edge finishing options include rolled hems, folded hems with topstitching, or raw edges sealed with heat or ultrasonic bonding. A rolled hem, commonly used for chiffon, adds approximately 0.5 cm to the width and 1.0 cm to the length per side, resulting in a slightly smaller visible area. The choice of finish affects both appearance and fray resistance, with rolled hems providing the most durable edge for sheer fabrics.

Color Consistency and Dyeing Considerations

Achieving consistent red shades in polyester chiffon requires precise control of disperse dye concentration, temperature, and pH during the dyeing process. Common red shades include Pantone 18-1663 TPX (Vibrant Red), 18-1664 TPX (Classic Red), and 18-1665 TPX (Deep Red), though exact matching depends on the specific dye lot and fabric base. Color variation between lots is typically managed using a ΔE tolerance of less than 3.0 under D65 lighting, as measured by a spectrophotometer.

Factors affecting final color appearance include fabric weight, yarn twist, and any pre-treatment such as scouring or bleaching. Lighter weight chiffon may appear more translucent, altering the perceived depth of color. Buyers should request lab-dipped samples for approval before bulk production, especially when color matching to other garment components is critical.

Typical Applications in Apparel

Red chiffon scarves are commonly used as fashion accessories in ladies' wear, particularly for evening attire, bridal ensembles, and seasonal collections. The sheer quality allows layering over solid garments without adding bulk, while the red hue provides a contrasting accent. In bridal applications, red may be used in cultural or thematic weddings where the color symbolizes celebration or prosperity.

Beyond direct wear, these scarves are occasionally used in garment trimming, such as appliqués on blouses or sleeves, or as decorative elements in evening gowns. The lightweight nature minimizes drape distortion when applied to heavier fabrics. Industrial buyers should consider the end-use environment—such as exposure to perspiration, sunlight, or frequent washing—when evaluating suitability, as these factors can affect long-term color retention and fabric integrity.

Packaging and Shipping Considerations

To prevent wrinkling and snagging during transit, chiffon scarves are typically folded neatly and packed in polyethylene bags, with 12 to 24 pieces per inner carton depending on thickness. Outer cartons are usually corrugated fiberboard, sized to optimize pallet utilization (commonly 1.2m x 1.0m base). Each scarf may include a tissue paper insert to reduce friction between pieces. For export shipments, cartons are often marked with handling instructions such as "Keep Dry" and "Do Not Crush."

Volumetric weight is a significant factor in shipping cost due to the low density of chiffon. A typical carton containing 24 scarves (each 170cm x 75cm) may have a gross weight of 1.8 kg but occupy a volume equivalent to 6–8 kg for air freight calculations. Buyers should confirm packaging methods and carton dimensions with suppliers to accurately estimate landed costs, especially when ordering mixed sizes or custom finishes.

Quality Inspection Points

Standard quality control for red chiffon scarves includes visual inspection for color uniformity, surface defects (such as snags, runs, or oil spots), and dimensional accuracy. AQL (Acceptable Quality Level) levels are commonly set at 2.5 for major defects and 4.0 for minor defects under ISO 2859-1. Inspection typically occurs at 100% for pre-shipment checks or via statistically valid sampling for bulk orders.

Additional checks may include seam strength (if hemmed), colorfastness to rubbing (ISO 105-X12), and pilling resistance (though less critical for chiffon due to low abrasion exposure). For orders requiring specific performance, buyers can request test reports from accredited laboratories. Suppliers should provide clarification on inspection standards and acceptable tolerances upon inquiry.

For procurement inquiries regarding custom dimensions, specific red shades, edge finishes, or packaging requirements, please contact our sales team to discuss technical specifications and minimum order quantities. Sample evaluation is recommended before initiating bulk production to ensure alignment with end-use expectations.